|
It is currently Wed Sep 08, 2010 5:12 pm
|
View unanswered posts | View active topics
  |
Page 1 of 1
|
[ 7 posts ] |
|
| Author |
Message |
|
Moded331
Street Outlaw
Joined: Sun Aug 19, 2007 10:32 am
Posts: 296
Location: Lakestevens, WA
|
 Window switch fix I know its not exciting or anything, but my driver side window stoped working. It was doing just fine, and the other day it started acting up, and would only work when it felt like it, then just stopped working all togeather. What I did to fix it was I pulled the black cover, then pulled the two screws that attatch the cover to the switchs. After that I took the switch for the passenger side (It was working fine) and put it in place of the driver side. The driver side worked after that, so I knew it was the switch. I took a small flat tip screw driver and popped the switch apart to see if it was broken/coroded. It wasnt broken, so I used the screw driver to clean up the conections. I pluged the switch back in, and it worked, so I just put everything back togeather...So if yours starts having the same problems, the switch is a good place to start.
_________________
I wanna go fast!
1989 Notch-DSS 331, Comp cams XE264HR, BBK cai, 8.8 swap w/
3.73s, Detroit tru track w/31 spline axles, Astro T-5
1986 GT T-top-No engine or tranny...
1987 Bronco 302-stock
 Matt
|
| Sun Jul 25, 2010 3:19 pm |
 |
 |
|
jon_daniels
Founding Member/Supporter/Contributor
Joined: Mon May 29, 2006 1:12 am
Posts: 5343
Location: DALLAS
|
Re: Window switch fix nice! i love free fixes and IIRC my passenger side switch is kaput
_________________
Jon - 89 GT t5 3.73
|
| Mon Jul 26, 2010 8:42 pm |
|
|
|
Moded331
Street Outlaw
Joined: Sun Aug 19, 2007 10:32 am
Posts: 296
Location: Lakestevens, WA
|
Re: Window switch fix Its always a pain when stupid little stuff like that goes out. Free is a good price...
_________________
I wanna go fast!
1989 Notch-DSS 331, Comp cams XE264HR, BBK cai, 8.8 swap w/
3.73s, Detroit tru track w/31 spline axles, Astro T-5
1986 GT T-top-No engine or tranny...
1987 Bronco 302-stock
Matt
|
| Thu Jul 29, 2010 12:13 am |
|
|
|
86fiveoh
Renegade
Joined: Fri Aug 31, 2007 5:13 pm
Posts: 641
Location: West Chester, PA
|
Re: Window switch fix Good tip. I've never been lucky enough for it to be the switch. Mine always end up being the motor.
_________________
|
| Fri Jul 30, 2010 7:42 am |
|
|
|
Moded331
Street Outlaw
Joined: Sun Aug 19, 2007 10:32 am
Posts: 296
Location: Lakestevens, WA
|
Re: Window switch fix 86fiveoh wrote: Good tip. I've never been lucky enough for it to be the switch. Mine always end up being the motor. Thats always a fun one...I havnt had to do one yet, and dont realy want to. I heard its a real pain.
_________________
I wanna go fast!
1989 Notch-DSS 331, Comp cams XE264HR, BBK cai, 8.8 swap w/
3.73s, Detroit tru track w/31 spline axles, Astro T-5
1986 GT T-top-No engine or tranny...
1987 Bronco 302-stock
Matt
|
| Fri Jul 30, 2010 3:13 pm |
|
|
|
86fiveoh
Renegade
Joined: Fri Aug 31, 2007 5:13 pm
Posts: 641
Location: West Chester, PA
|
Re: Window switch fix They are not bad to do. I can do one in about 30min now.
_________________
|
| Sat Jul 31, 2010 1:23 pm |
|
|
|
Moded331
Street Outlaw
Joined: Sun Aug 19, 2007 10:32 am
Posts: 296
Location: Lakestevens, WA
|
Re: Window switch fix LoL nice
_________________
I wanna go fast!
1989 Notch-DSS 331, Comp cams XE264HR, BBK cai, 8.8 swap w/
3.73s, Detroit tru track w/31 spline axles, Astro T-5
1986 GT T-top-No engine or tranny...
1987 Bronco 302-stock
Matt
|
| Mon Aug 02, 2010 2:16 am |
|
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
